Ion Transport Behavior in van der Waals Gaps of 2D Materials.

2D materials, with advantages of atomic thickness and novel physical/chemical characteristics, have emerged as the vital building blocks for advanced lamellar membranes which possess promising potential in energy storage, ion separation, and catalysis. When 2D materials are stacked together, the van der Waals (vdW) force generated between adjacent layered nanosheets induces the construction of an ordered lamellar membrane. By regulating the interlayer spacing down to the nanometer or even sub-nanometer scale, rapid and selective ion transport can be achieved through such vdW gaps. The further improvement and application of qualified 2D materials-based lamellar membranes (2DLMs) can be fulfilled by the rational design of nanochannels and the intelligent micro-environment regulation under different stimuli. Focusing on the newly emerging advances of 2DLMs, in this review, the common top-down and bottom-up synthesis approaches of 2D nanosheets and the design strategy of functional 2DLMs are briefly introduced. Two essential ion transport mechanisms within vdW gaps are also involved. Subsequently, the responsive 2DLMs based on different types of external stimuli and their unique applications in nanofluid transport, membrane-based filters, and energy storage are presented. Based on the above analysis, the existing challenges and future developing prospects of 2DLMs are further proposed.

Atomic-scale manipulation of polar domain boundaries in monolayer ferroelectric In2Se3.

Domain boundaries have been intensively investigated in bulk ferroelectric materials and two-dimensional materials. Many methods such as electrical, mechanical and optical approaches have been utilized to probe and manipulate domain boundaries. So far most research focuses on the initial and final states of domain boundaries before and after manipulation, while the microscopic understanding of the evolution of domain boundaries remains elusive. In this paper, we report controllable manipulation of the domain boundaries in two-dimensional ferroelectric In2Se3 with atomic precision using scanning tunneling microscopy. We show that the movements of the domain boundaries can be driven by the electric field from a scanning tunneling microscope tip and proceed by the collective shifting of atoms at the domain boundaries. Our density functional theory calculations reveal the energy path and evolution of the domain boundary movement. The results provide deep insight into domain boundaries in two-dimensional ferroelectric materials and will inspire inventive applications of these materials.

One-atom-thick hexagonal boron nitride co-catalyst for enhanced oxygen evolution reactions.

Developing efficient (co-)catalysts with optimized interfacial mass and charge transport properties is essential for enhanced oxygen evolution reaction (OER) via electrochemical water splitting. Here we report one-atom-thick hexagonal boron nitride (hBN) as an attractive co-catalyst with enhanced OER efficiency. Various electrocatalytic electrodes are encapsulated with centimeter-sized hBN films which are dense and impermeable so that only the hBN surfaces are directly exposed to reactive species. For example, hBN covered Ni-Fe (oxy)hydroxide anodes show an ultralow Tafel slope of ~30 mV dec-1 with improved reaction current by about 10 times, reaching ~2000 mA cm-2 (at an overpotential of ~490 mV) for over 150 h. The mass activity of hBN co-catalyst is found exceeding that of commercialized catalysts by up to five orders of magnitude. Using isotope experiments and simulations, we attribute the results to the adsorption of oxygen-containing intermediates at the insulating co-catalyst, where localized electrons facilitate the deprotonation processes at electrodes. Little impedance to electron transfer is observed from hBN film encapsulation due to its ultimate thickness. Therefore, our work also offers insights into mechanisms of interfacial reactions at the very first atomic layer of electrodes.

Precise Atomic Structure Regulation of Single-Atom Platinum Catalysts toward Highly Efficient Hydrogen Evolution Reaction.

Noble metal single-atom-catalysts (SACs) have demonstrated significant potential to improve atom utilization efficiency and catalytic activity for hydrogen evolution reaction (HER). However, challenges still remain in rationally modulating active sites and catalytic activities of SACs, which often results in sluggish kinetics and poor stability, especially in neutral/alkaline media. Herein, precise construction of Pt single atoms anchored on edge of 2D layered Ni(OH)2 (Pt-Ni(OH)2 -E) is achieved utilizing in situ electrodeposition. Compared to the single-atom Pt catalysts anchored on the basal plane of Ni(OH)2 (Pt-Ni(OH)2 -BP), the Pt-Ni(OH)2 -E possesses superior electron affinity and high intrinsic catalytic activity, which favors the strong adsorption and rapid dissociation toward water molecules. As a result, the Pt-Ni(OH)2 -E catalyst requires low overpotentials of 21 and 34 mV at 10 mA cm-2 in alkaline and neutral conditions, respectively. Specifically, it shows the high mass activity of 23.6 A mg-1 for Pt at the overpotential of 100 mV, outperforming the reported catalysts and commercial Pt/C. This work provides new insights into the rational design of active sites for preparing high-performance SACs.

Chiral Two-Dimensional Hybrid Organic-Inorganic Perovskites for Piezoelectric Ultrasound Detection.

Hybrid organic-inorganic perovskites (HOIPs) have exhibited striking application potential in piezoelectric energy harvesting and sensing due to their high piezoelectricity, light weight, and solution processability. However, to date, the application of piezoelectric HOIPs in ultrasound detection has not yet been explored. Here, we report the synthesis of a pair of chiral two-dimensional piezoelectric HOIPs, R-(4-bromo-2-butylammonium)2PbBr4 and S-(4-bromo-2-butylammonium)2PbBr4 [R-(BrBA)2PbBr4 and S-(BrBA)2PbBr4], which show low mechanical strength and significant piezoelectric strain coefficients that are advantageous for mechanoelectrical energy conversion. Benefiting from these virtues, the R-(BrBA)2PbBr4@PBAT and S-(BrBA)2PbBr4@PBAT [PBAT = poly(butyleneadipate-co-terephthalate)] composite films show prominent underwater ultrasound detection performance with a transmission effectivity of 12.0% using a 10.0 MHz probe, comparable with that of a polyvinylidene fluoride (PVDF) device fabricated in the same conditions. Density functional theory calculations reveal that R-(BrBA)2PbBr4 and S-(BrBA)2PbBr4 have a beneficial acoustic impedance (5.07-6.76 MRayl) compatible with that of water (1.5 MRayl), which is responsible for the facile ultrasound-induced electricity generation. These encouraging results open up new possibilities for applying piezoelectric HOIPs in underwater ultrasound detection and imaging technologies.

High-Entropy Laminates with High Ion Conductivities for High-Power All-Solid-State Lithium Metal Batteries.

Solid-state electrolytes (SSEs) are crucial to high-energy-density lithium metal batteries, but they commonly suffer from slow Li+ transfer kinetics and low mechanical strength, severely hampering the application for all-solid-state batteries. Here, we develop a two-dimensional (2D) high-entropy lithium-ion conductor, lithium-containing transition-metal phosphorus sulfide, HE-LixMPS3 (Lix(Fe1/5Co1/5Ni1/5Mn1/5Zn1/5)PS3) with five transition-metal atoms and lithium ions (Li+) dispersed into [P2S6]2- framework layers, exhibiting high lattice distortions and a large amount of cation vacancies. Such unique features enable to efficiently accelerate the migration of Li+ in 2D [P2S6]2- interlamination, delivering a high ionic conductivity of 5 × 10-4 S cm-1 at room temperature. Moreover, the HE-LixMPS3 laminate can be employed as a building block to construct an ultrathin SSE film (∼10 µm) based on strong C-S bonding between HE-LixMPS3 and nitrile-butadiene rubber. The SSE film delivers a strong mechanical robustness (6.0 MPa, 310% elongation) and a high ionic conductivity of 4 × 10-4 S cm-1, showing a long cycle stability of 800 h in lithium symmetric cells. Coupled with LiFePO4 cathode and lithium anode, the all-solid-state battery presents a high Coulombic efficiency of 99.8% within 2000 cycles at 5.0 C.

Fast Lithium Ion Transport Pathways Constructed by Two-Dimensional Boron Nitride Nanoflakes in Quasi-Solid-State Polymer Electrolyte.

Quasi-solid-state electrolytes (QSSEs) are gaining huge popularity because of their significantly improved safety performance over nonaqueous liquid electrolytes and superior process adaptability over all-solid-state electrolytes. However, because of the existence of liquid molecules, QSSEs typically have low lithium ion transference numbers and compromised thermal stability. In this work, we present the fabrication of a well-rounded QSSE by introducing hexagonal boron nitride nanoflakes (BNNFs) as an inorganic filler in a poly(vinylene carbonate) matrix. BNNFs, in contrast to most inorganic fillers used as anion trappers, are used to build fast lithium ion transport pathways directly on their two-dimensional surfaces. We confirm the attractive coupling between lithium ions and BNNFs, and we confirm that with the help of BNNFs, lithium ions can migrate with less damping and a lower transport energy barrier. As a result, the designed electrolyte exhibits good ion transportability, promoted fire retardancy, and good compatibility with lithium metal anodes and commercial cathodes.

High-Pressure Synthesis of Single-Crystalline SnS Nanoribbons.

Two-dimensional tin monosulfide (SnS) is attractive for the development of electronic and optoelectronic devices with anisotropic characteristics. However, its shape-controlled synthesis with an atomic thickness and high quality remains challenging. Here, we show that highly crystalline SnS nanoribbons can be produced via high-pressure (0.5 GPa) and thermal treatment (400 °C). These SnS nanoribbons have a length of several tens of micrometers and a thickness down to 5.8 nm, giving an average aspect ratio of ∼30.6. The crystal orientation along the zigzag direction and the in-plane structural anisotropy of the SnS nanoribbons are identified by transmission electron microscopy and polarized Raman spectroscopy, respectively. An ionic liquid-gated field-effect transistor fabricated using the SnS nanoribbon exhibits an on/off current ratio of >103 and a field-effect mobility of ∼0.7 cm2 V-1 s-1. This work provides a unique way to achieve one-dimensional growth of SnS.

Twisted Bilayer Graphene Induced by Intercalation.

Twisted bilayer graphene (tBLG) has gained significant attention due to its unique physical and electronic properties. However, efficient fabrication of high-quality tBLG with diverse twist angles is crucial to expedite research on angle-dependent physics and potential applications. In this study, an intercalation strategy utilizing organic molecules, such as 1,2-dichloroethane, is developed to weaken the interlayer interaction and induce slide or rotation of the topmost graphene layer for tBLG fabrication. The proportion of tBLGs in the resulting 1,2-dichloroethane-treated BLG (dtBLG) reaches up to 84.4% for twist angles ranging from 0° to 30°, surpassing previously reported methods using chemical vapor deposition (CVD). Moreover, the twist angle distribution is not uniform and tends to concentrate in the ranges of 0-10° and 20-30°. This facile and rapid intercalation-based methodology provides a practical solution for studying angle-dependent physics and advancing the utilization of twisted two-dimensional materials.

Ultralow-Dielectric-Constant Atomic Layers of Amorphous Carbon Nitride Topologically Derived from MXene.

Low-dielectric-constant materials such as silicon dioxide serving as interconnect insulators in current integrated circuit face a great challenge due to their relatively high dielectric constant of ≈4, twice that of the recommended value by the International Roadmap for Devices and Systems, causing severe parasitic capacitance and associated response delay. Here, novel atomic layers of amorphous carbon nitride (a-CN) are prepared via a topological conversion of MXene-Ti3 CNTx under bromine vapor. Remarkably, the assembled a-CN film exhibits an ultralow dielectric constant of 1.69 at 100 kHz, much lower than the previously reported dielectric materials such as amorphous carbon (2.2) and fluorinated-doped SiO2 (3.6), ascribed to the low density of 0.55 g cm-3 and high sp3 C level of 35.7%. Moreover, the a-CN film has a breakdown strength of 5.6 MV cm-1 , showing great potential in integrated circuit application.

Ultrasmooth and Dense Lithium Deposition Toward High-Performance Lithium-Metal Batteries.

Lithium (Li)-metal batteries (LMBs) with stable solid electrolyte interphase (SEI) and dendrite-free formation have great potential in next-generation energy storage devices. Here, vertically aligned 3D Cu2 S nanosheet arrays are fabricated on the surface of commercial Cu foils, which in situ generate ultrathin Cu nanosheet arrays to reduce local current density and Li2 S layers on the surfaces to work as an excellent artificial SEI. It is found that Li presents a 3D-to-planar deposition model, and Li2 S layers are reversibly movable between the 3D nanosheet surface and 2D planar surface of Li during long-term cycling. This enables ultrasmooth and dense Li deposition at 1 mA cm-2 , presenting an average thickness of ≈53.0 µm at 10 mAh cm-2 , which is close to the theoretical Li foil thickness and is highly reversible at different cycles. Thus, 1150 stable cycles with high Coulombic efficiency (CE, 99.1%) at ether-based electrolytes and 300 stable cycles with high CE (98.8%) at carbonate electrolytes are realized in half-cell with a capacity of 1 mAh cm-2 at 1 mA cm-2 . When coupled with commercial cathodes (LiFePO4 or LiNi0.8 Co0.1 Mn0.1 O2 ), the full cells present substantially enhanced cyclability under high cathode loading, limited (or zero) Li excess, and lean electrolyte conditions, even at -20 °C.

Phonon-assisted upconversion in twisted two-dimensional semiconductors.

Phonon-assisted photon upconversion (UPC) is an anti-Stokes process in which incident photons achieve higher energy emission by absorbing phonons. This letter studies phonon-assisted UPC in twisted 2D semiconductors, in which an inverted contrast between UPC and conventional photoluminescence (PL) of WSe2 twisted bilayer is emergent. A 4-fold UPC enhancement is achieved in 5.5° twisted bilayer while PL weakens by half. Reduced interlayer exciton conversion efficiency driven by lattice relaxation, along with enhanced pump efficiency resulting from spectral redshift, lead to the rotation-angle-dependent UPC enhancement. The counterintuitive phenomenon provides a novel insight into a unique way that twisted angle affects UPC and light-matter interactions in 2D semiconductors. Furthermore, the UPC enhancement platform with various superimposable means offers an effective method for lighting bilayers and expanding the application prospect of 2D stacked van der Waals devices.

SiOxCy Microspheres with Homogeneous Atom Distribution for a High-Performance Li-Ion Battery.

The broad application of silicon-based materials is limited by large volume fluctuation, high preparation costs, and complicated preparation processes. Here, we synthesized SiOxCy microspheres on 3D copper foams by a simple chemical vapor deposition method using a low-cost silane coupling agent (KH560) as precursors. The SiOxCy microspheres are available with a large mass loading (>3 mg/cm2) on collectors and can be directly used as the electrode without any binders or extra conductive agents. As a result, the as-prepared SiOxCy shows a high reversible capacity of ∼1240 mAh g-1 and can be cycled more than 1900 times without decay. Ex situ characterizations show that the volume change of the microspheres is only 55% and the spherical morphology as well as the 3D structure remain intact after cycles. Full-cell electrochemical tests paired with LiFePO4 as cathodes show 87% capacity retention after 500 cycles, better than most reported results, thus showing the commercial potential of the material.

Thickness-Tunable Growth of Composition-Controllable Two-Dimensional FexGeTe2.

Two-dimensional (2D) magnetic materials provide an ideal platform for investigating novel magnetism and spin behavior in low-dimensional systems while being restricted by the deficiency of accurate bottom-up synthesis. To overcome this difficulty, a facile and universal flux-assisted growth (FAG) method is proposed to synthesize the multicomponent FexGeTe2 (x = 3-5) with different Fe contents and even alloyed with hetero metal atoms. This one-to-one method ensures the stoichiometry consistency from the FexGeTe2 and MyFe5-yGeTe2 (M = Co, Ni) bulk crystal precursors to the 2D nanosheets, with controllable composition. Tuning the growth temperatures can provide thickness-tunable products. Changeable magnetic properties of FexGeTe2 and alloyed CoyFe5-yGeTe2 are substantiated by the superconducting quantum interference device and reflective magnetic circular dichroism. This method generates thickness-tunable high-crystallinity FexGeTe2 samples without phase separation and exhibits a high tolerance to different substrates and a large temperature window, providing a new avenue to synthesize and explore such multicomponent 2D magnets and even the alloyed ones.

Single atom catalysts in Van der Waals gaps.

Single-atom catalysts provide efficiently utilized active sites to improve catalytic activities while improving the stability and enhancing the activities to the level of their bulk metallic counterparts are grand challenges. Herein, we demonstrate a family of single-atom catalysts with different interaction types by confining metal single atoms into the van der Waals gap of two-dimensional SnS2. The relatively weak bonding between the noble metal single atoms and the host endows the single atoms with more intrinsic catalytic activity compared to the ones with strong chemical bonding, while the protection offered by the layered material leads to ultrahigh stability compared to the physically adsorbed single-atom catalysts on the surface. Specifically, the trace Pt-intercalated SnS2 catalyst has superior long-term durability and comparable performance to that of commercial 10 wt% Pt/C catalyst in hydrogen evolution reaction. This work opens an avenue to explore high-performance intercalated single-atom electrocatalysts within various two-dimensional materials.

Three-Dimensional Fe Single-Atom Catalyst for High-Performance Cathode of Zn-Air Batteries.

Designing cost-effective and highly active oxygen reduction reaction (ORR) catalysts is critical for the development of Zn-air batteries (ZABs). Iron-nitrogen-carbon (Fe-N-C) catalysts with single-atom Fe-Nx active sites are considered as one of the most promising alternatives to noble Pt but are hindered by unsatisfactory activity and durability. Herein, a NaCl template-assisted in situ pyrolysis technique is utilized to massively fabricate Fe-N-C single-atom catalysts (SACs) anchored on the three-dimensional open-pore carbon networks (denoted as 3D SAFe). The 3D SAFe catalyst exhibits ultrahigh activity with a half-wave potential of 0.90 V (vs RHE), benefiting from the enhanced mass diffusion and the increased amount of effective Fe-N4 sites. Consequently, the ZABs assembled with 3D SAFe deliver high peak power density up to 156 mW cm-2 and outstanding durability of 80 h, suggesting the application potential of the 3D SAFe catalyst. This work inspires the rational design and synthesis of highly efficient SACs for ZABs.

Stable Lithium Plating and Stripping Enabled by a LiPON Nanolayer on PP Separator.

The practical application of the Li metal anode (LMA) is hindered by its low coulombic efficiency and dendrite formation. Although solid-state electrolytes hold promise as ideal partners for LMA, their effectiveness is limited by the poor workability and ionic conductivity. Herein, a modified separator combining the rapid Li+ transport of a liquid electrolyte and the interfacial stability of a solid-state electrolyte is explored to realize stable cycling of the LMA. A conformal nanolayer of LiPON is coated on a polypropylene separator by a scalable magnetron sputtering method, which is compatible with current Li-ion battery production lines and promising for the practical applications. The resulting LMA-electrolyte/separator interface is Li+ -conductive, electron-insulating, mechanically and chemically stable. Consequently, Li|Li cells maintain stable dendrite-free cycling with overpotentials of 10 and 40 mV over 2000 h at 1 and 5 mA cm-2 , respectively. Additionally, the Li|LiFePO4 full cells achieve a capacity retention of 92% after 550 cycles, confirming its application potential.

Electrochemical CO2 reduction to ethylene by ultrathin CuO nanoplate arrays.

Electrochemical reduction of CO2 to multi-carbon fuels and chemical feedstocks is an appealing approach to mitigate excessive CO2 emissions. However, the reported catalysts always show either a low Faradaic efficiency of the C2+ product or poor long-term stability. Herein, we report a facile and scalable anodic corrosion method to synthesize oxygen-rich ultrathin CuO nanoplate arrays, which form Cu/Cu2O heterogeneous interfaces through self-evolution during electrocatalysis. The catalyst exhibits a high C2H4 Faradaic efficiency of 84.5%, stable electrolysis for ~55 h in a flow cell using a neutral KCl electrolyte, and a full-cell ethylene energy efficiency of 27.6% at 200 mA cm-2 in a membrane electrode assembly electrolyzer. Mechanism analyses reveal that the stable nanostructures, stable Cu/Cu2O interfaces, and enhanced adsorption of the *OCCOH intermediate preserve selective and prolonged C2H4 production. The robust and scalable produced catalyst coupled with mild electrolytic conditions facilitates the practical application of electrochemical CO2 reduction.

Torsional Properties of Bundles with Randomly Packed Carbon Nanotubes.

Carbon nanotube (CNT) bundles/fibers possess promising applications in broad fields, such as artificial muscles and flexible electronics, due to their excellent mechanical properties. The as-prepared CNT bundles contain complex structural features (e.g., different alignments and components), which makes it challenging to predict their mechanical performance. Through in silico studies, this work assessed the torsional performance of CNT bundles with randomly packed CNTs. It is found that CNT bundles with varying constituent CNTs in terms of chirality and diameter exhibit remarkably different torsional properties. Specifically, CNT bundles consisting of CNTs with a relatively large diameter ratio possess lower gravimetric energy density and elastic limit than their counterpart with a small diameter ratio. More importantly, CNT bundles with the same constituent CNTs but different packing morphologies can yield strong variation in their torsional properties, e.g., up to 30%, 16% and 19% difference in terms of gravimetric energy density, elastic limit and elastic constants, respectively. In addition, the separate fracture of the inner and outer walls of double-walled CNTs is found to suppress the gravimetric energy density and elastic limit of their corresponding bundles. These findings partially explain why the experimentally measured mechanical properties of CNT bundles vary from each other, which could benefit the design and fabrication of high-performance CNT bundles.

Multifunctional Chiral 2D Lead Halide Perovskites with Circularly Polarized Photoluminescence and Piezoelectric Energy Harvesting Properties.

Introducing the chiral spacers to two-dimensional (2D) lead halide perovskites (LHPs) enables them to exhibit circularly polarized photoluminescence (CPPL), which could have applications in chiral-optics and spintronics. Despite that a great deal of effort has been made in this field, the reported polarization degree of CPPL at ambient conditions is still very limited, and the integration of multiple functionalities also remains to be explored. Here we report the structures, CPPL, and piezoelectric energy harvesting properties of chiral 2D LHPs, [R-1-(4-bromophenyl)ethylaminium]2PbI4 (R-[BPEA]2PbI4) and [S-1-(4-bromophenyl)ethylaminium]2PbI4 (S-[BPEA]2PbI4). Our results show that these chiral perovskites are direct bandgap semiconductors and exhibit CPPL centered at ∼513 nm with a maximum degree of polarization of up to 11.0% at room temperature. In addition, the unique configurational arrangement of the chiral spacers is found to be able to reduce the interlayer π-π interactions and consequently result in strong electron-phonon coupling. Furthermore, the intrinsic chirality of both R-[BPEA]2PbI4 and S-[BPEA]2PbI4 enables them to be piezoelectric active, and their composite films can be applied to generate voltages and currents up to ∼0.6 V and ∼1.5 µA under periodic impacting with a strength of 2 N, respectively. This work not only reports a high degree of CPPL but also demonstrates piezoelectric energy harvesting behavior for realizing multifunctionalities in chiral 2D LHPs.